76
wilson Down 0
0
0
0
0
show profile statistics <Profile Name>
Example:
Router> show profile statistics wilson
wilson
Received
Transmitted
---------------------------------------------------------------
Total
octets:
0
0
Total
packets:
0
0
Total
errors:
0
0
Security Command
set ip private <ip_addr> <netMask>
Description:
This command is used to modify the “private” IP address on the router’s LAN interface.
Please refer to IP command category for details.
SNMP Commands
Remote SNMP management consoles can access the set of MIBs implemented in the router. MIB
information is transferred from the router’s SNMP Agent to the SNMP Management console via SNMP
Gets
and
Traps
(
Set
commands are not supported).
. Traps
are unsolicited status messages sent from the
router to report management events asynchronously. Trap Managers must be configured in order to
receive these messages.
clear trap manager <1-5>
Description:
This command clears the IP address for the specified trap manager. When an SNMP trap
condition is met, and if trap generation has been enabled, a trap message will automatically be sent out to
each trap manager whose IP address has been defined. A total of five trap managers can be defined in the
system.
disable trap
enable trap
Description:
This command is used to enable or disable trap message generation. When trap generation is
disabled, no SNMP trap messages will be generated. When it is enabled, any SNMP traps will be sent to
each of the trap managers that have been defined.
set community string read <"password">
Description:
This command sets the community string used for authenticating SNMP get and getnext
requests.
The default for the read community string is “public”. The community string is case sensitive.