6
Chapter 3
Configuration
3.1 Before Configuration
This section describes the configuration required by LAN-attached PCs that communicate with BIPAC-645,
either to configure the BIPAC-645, or for network access. These PCs must have an Ethernet interface installed
properly, be connected to the BIPAC-645 either directly or through an external repeater hub, and have TCP/IP
installed and configured to obtain an IP address through a DHCP server.
Directly connect a Windows OS to the BIPAC-645. If TCP/IP is not already installed, follow the steps
below for its installation.
Any TCP/IP capable workstation can be used to communicate with or through
BIPAC-645. To configure other types of workstations, please consult the
manufacturer’s documentation
Configuring PC in Windows 95/98/ME
1.
Go to
Start/Settings/Control
Panel. In the Control Panel
double-click on
Network
and
choose the
Configuration
tab.
2.
Select
TCP/IP -> NE2000
Compatible
, or any Network
Interface Card (NIC) in your
PC.