Operating Manual no.
057-2-6-0017-R0
P. 26
Version 2021
EN
Remove the rear wheel and fix the axle in the two plastic U-shaped races of the support
and fix it with the clamp;
6-
Proceed with the lifting operation of the frame (up button on the button panel).
WARNING
: Never lift the load before making sure that it is firmly locked to the
supports.
Always check during lifting that the load does not slope and unbalance;
During the ascent/descent phase the operator is required to move away from the lifting
platform according to the length allowed by the control unit cable.
7.2
Unloading operations
1-
Make sure that the scissor sliding guides are free from foreign bodies (bolts or other
objects would stop the descent and could cause serious damage or dangerous jolts);
2-
Operate the descent control on the button panel;
3-
When the descent is completed free the bicycle from the locking systems;
4-
Lower the vehicle using the brakes to stop the stroke.
