Operating Manual no.
057-2-6-0017-R0
P. 20
Version 2021
EN
5
Installation section
The machine must be installed in compliance with the safety regulations and instructions included
in this chapter.
WARNING
: COMPLETELY remove the pallet located under the lift by removing the
fixing screws before using the machine.
The machine does not need a base, but requires a flat and horizontal floor. The floor must be able
to support a minimum weight of 1000 kg/m2.
The lift must be placed in such a way as to allow the operator to easily repair the bicycles.
The lift must therefore be installed by taking into account the minimum distances from walls or
other possible boundaries (boundaries are imaginary lines that delimit the work or safety areas of
other machines or structures).
The ascent/descent ramp must be positioned so that the vehicle can be easily lifted. The ramp
must not be directed towards an obstacle that is too close to the vehicle lifting platform.
WARNING
: It is absolutely forbidden to position the lifting platform on bumpy or
inclined ground.
Bring the machine to the place of installation by using a mechanical lift, unpack it and place it in
the chosen area.
To install the machine, fix it to the floor with 4 dowels M10 x 100 mm, using the appropriate holes
(used to fix the sleepers).
