Operating Manual no.
057-2-6-0017-R0
P. 12
Version 2021
EN
2.4
Intended use
Disseminate the instructions described in this chapter to all personnel involved in
the preparation and use of the machine.
The machine is intended for lifting bicycles and E-Bikes for maintenance purposes, as part of the
mechanical workshops.
The machine has been designed and built for the specified use; a different use and
non-compliance with the technical parameters set by the Manufacturer may be
dangerous for the operators.
Any other use different from that indicated is to be considered as not planned and
may cause damage to the machine and Operators. It is therefore
FORBIDDEN
.
The machine must always be operated by only one Operator.
The Operator must always work in proper lighting conditions and wear clothes and protections
appropriate to the task performed (typical activity of mechanical workshop).
The working position of the operator during the ascent and descent phases is located in the area
around the machine at the safety distance allowed by the length of the control panel cable.
It is forbidden to lift bicycles weighing more than the maximum capacity of the
platform.
It is forbidden to lift four-wheeled vehicles, using two lifting platforms placed side by
side.
2.5
Reasonably foreseeable misuse
Reasonably foreseeable misuse means the use of the machine in a manner different from that
indicated in the use instructions, but which may derive from the easily predictable human
behavior.
The experience of Bike-Lift EUROPE s.r.l. allows you to report beforehand the following cases of
misuse for which it is not possible to use the machine:
A) INSTALLATION
The following cases are considered a misuse:
Installing the machine outdoors or in environments that do not comply with the
environmental technical data in the instructions.
Installing the machine without following the instructions provided by the manufacturer
Bike-Lift EUROPE s.r.l.
