1
)
Changing the operation mode
Before tightening, always check the setting and be sure to execute the tightening operation
with the correct setting.
If the operation is performed with the wrong setting, the proper tightening torque will not be
reached and may cause damage to the collet chuck or the torque wrench.
Caution
In case of tightening a collet chuck with a different size, replace the adapter and adjust the setting of the
wrench.
※
Power can only be turned off while in working mode. Note that power cannot be turned off while in
setting mode or while the peak hold function is operating.
・
The device will automatically turn off if it is not tightening anything or if the operation buttons are not
pressed for one hour.
(Auto power-off function)
・
The setting selected when the device is turned OFF is saved, so it is possible to use it immediately after
turning the device ON again.
●
Setting of the tightening torque
①
Press and hold the power operation button.
②
OFF is displayed on the display panel, then the
display turns off and the power is shut off.
2
)
Power OFF
MGR-TL/P
MGR-TL/P
Press and hold the peak hold operation button to
switch to setting mode.
The display switches from the working mode screen
to the setting mode screen.
The setting mode screen displays
setting names based on
corresponding collet chucks.
18
