Operation buttons
Two buttons are used to perform each operation.
MEGA Wrench Adapter
MEGA chuck series exclusive adapter. The adapter
is provided with one-way clutch. Since the adapter
is interchangeable, select the adapter that
corresponds to the size of the collet chuck used.
①
Battery level
Indicates the battery level at one of three levels. When three
segments are lit it indicates a charge of 100% - 50%, when
two are lit it indicates a charge of 50% - 10%, and when one
is lit you should prepare to replace the battery.
①
Buzzer
Indicates that the buzzer sound is enabled.
②
Vibration
Indicates that vibration is enabled in the grip.
③
Display panel
The panel displays information such as tightening
torque values, LED indicators, and settings.
②
③
Grip
The grip vibrates and a sound is emitted when the
set torque is reached.
④
Numerical values
Displays the tightening torque value or setting value.
④
LED indicators
These LEDs are used to indicate the proportion of the set
torque in real time, allowing the device to be used in an
analog fashion.
⑤
2. PARTS DESCRIPTION
●
Display panel
●
Names
MGR-TL/P
MEGA Wrench Adapter
Operation buttons
Display panel
Effective length line
(Force point)
①
③
②
⑤
Grip
④
Dedicated rubber cap
⑥
⑤
④
②
①
③
Less than 20% of set torque
All LEDs off
1 LED flashes white
2 LEDs flashes white
3 LEDs flashes white
4 LEDs flashes green
5 LEDs flashes blue
20% of set torque
40% of set torque
60% of set torque
80% of set torque
Set torque
⑥
Dedicated rubber cap
This is attached to protect the battery compartment
from water and dust.
It is removed when replacing the batteries.
⑤
Effective length line (Force point)
It indicates the point where to apply the force when
tightening.
Notification
provided
via buzzer and
vibration
15
