MGR-TL/P
①
②
MEGA6N
MEGA8N
MEGA10N
MEGA13N
MEGA16N
MEGA20N
MEGA 6E
MEGA8E
MEGA10E
MEGA13E
Suitable
collet chuck
Panel display name
Recommended torque
（N・m）
12
19
35
40
45
50
20
35
40
50
Power button
This button turns the power ON/OFF when it is
pressed and held while either the power is OFF or
the device is in working mode. It is used to select a
setting value while in setting mode.
①
Peak hold button
This button turns the peak hold function ON/OFF. It
can be pressed and held to switch between working
mode and setting mode. It is used to select a setting
value while in setting mode.
②
●
Working mode
●
Setting mode
●
Operation buttons
This mode is used for actual tightening work. The device starts in this mode when the power is turned
ON.
The current tightening torque is shown in real time on the display panel, together with the LED indicators.
When the set torque is reached, the device notifies the user by sounding a buzzer and vibrating the grip.
The peak hold function can be enabled to maintain the maximum value after reaching the set torque.
The Digital MEGA Torque Wrench is
configured with recommended
tightening torque presets for each
collet chuck. These can be selected
in setting mode.
When switched to setting mode, the
device will display setting names
based on corresponding collet
chucks.
Once the setting is confirmed and
the device is switched back to
working mode, the set torque will be
displayed.
Presets for each size are listed to
the right.
3. OUTLINE OF THE OPERATION MODES
16
