BIG BALE Transtacker, Руководство по эксплуатации и обслуживанию

Страница: 27 / 67

27
5.3.9 Auto Lower Turntable
This auto function returns the turntable to its home position (rotated correctly and resting on the
Turntable Stops).
NOTE : This auto function will retract the hooks. Therefore, DO NOT use this auto
function when there are bales on the turntable as this could cause damage to the machine and/or
tractor.
Figure 34: Auto Lower Stack Table
The main purpose of this function is to assist with loading the machine manually. Once you have placed
the bales on the platform, you can use this auto function to automatically lower the turntable. It will
check if the turntable is rotated and will rotate it back to its home position if necessary, before
lowering it onto the turntable stops.
5.3.10 Completing a Load
At the rear of the trailer, there is a sensor that detects when the trailer is ‘full’. Whe n the sensor is
activated, the background of the bale display turns blue (see Figure 35). Within the ‘ Auto-Stack ’
sequence, it will close the side gates and rear clamps, pull the forks up the bed, retract the guide bar,
lower the pickup and retract the pickup tines.
Figure 35: Bale Layout Background showing blue as trailer is 'Full'.
For rolled bale sizes 0.8x0.9m, 1.2x0.9m and 1.3x1.2m, the Transtacker can carry an additional layer
by cha
nging the ‘Extra Layer’ setting to ‘Active’. Table 3 shows you the different number of bales you
can carry depending on whether the ‘Extra Layer’ setting is ‘Active’ or ‘Inactive’.