24
Figure 26: Insert Hooks
1.
Check if the hooks are inserted into the bales. If hooks need inserting, press the bottom right
button and push the joystick to the right to hook the bales (Figure 26).
Figure 27: Raise Stack Table
2.
Press the bottom right button and move the joystick forward momentarily to lift the turntable
clear of the pickup and stops.
a.
NOTE
: Turntable lift POT sensor angle must be greater than
setting ‘
Minimum Table
Lift to Rotate/Extend’
for Turntable to extend, retract or rotate. This is a safety system
to prevent damage to the machine.
Figure 28: Extend Stack Table
3.
Hold down the middle button and move the joystick right until the turntable is forward
approximately 0.3-0.35m clear of its bottom nylon stops (Figure 28).
Содержание Transtacker
