BIG BALE Transtacker Extra Скачать руководство пользователя

Страница: 7 / 36

4.0

Safety

4.1

Safety in Operation & Maintenance

Operation of the machine without paying heed to fitting and

use of guards or to the safety notices renders you liable to

prosecution.

This applies even if you are the injured party.

Your attention is drawn to the safety notices (decals) that

are displayed on the machine. These notices should be kept

clean and intact so they are legible at all times.

If any of the notices become detached or defaced, they

must be replaced immediately.

These are available from your local Big Bale Transtacker

agent.

They are included in the spare parts list and examples to

aid identification are reproduced on the following pages.

WARNING: Read Owners Manual

This manual contains safety information and

operation and maintenance instructions for your Big Bale

Transtacker. The operator must ensure that he/she has fully

read and understood this manual before operating the

machine.

WARNING: Before Commencing Any
Repairs/Maintenance

Shut off engine, remove ignition key, and unplug electric

control box before performing any maintenance or repair

work.

WARNING:

Keep persons away from the machine during operation.

There is a danger from falling bales and moving machinery.

WARNING:

When the pickup guide is out there is a danger that it may

be overlooked by the operator. A flashing light and audible

signal on the control box indicates the guide is out. An

indicator on the pickup latch signals that the guide is in and

the pickup is locked in position

(Fig. 5)

WARNING:

Do not raise the platform of the Transtacker while under

high voltage power lines. Some parts of the machine can

exceed 5.2m high and cause electrocution and/or fire.

Fig. 5

Содержание Transtacker Extra





































Результаты поиска

Содержание Transtacker Extra

Отзывы:

Похожие инструкции для Transtacker Extra

Бренды по названию

Популярные бренды

BIG BALE Transtacker Extra, Руководство по эксплуатации и обслуживанию

Результаты поиска

Содержание Transtacker Extra

Отзывы:

Похожие инструкции для Transtacker Extra

Бренды по названию

Популярные бренды