BIG BALE Transtacker Extra, Руководство по эксплуатации и обслуживанию

Страница: 12 / 36

5.0 Operation
5.5 Controls
WARNING: Keep persons away from the machine while
operating. There is a danger from falling bales and moving
machinery.
CAUTION: When picking up the bales laid across sloping
ground, always traverse below the bale to ensure stability of
the stacking machine during pickup cycles.
Getting Started
Having entered the field, stop and set the machine ready to
operate as follows:
1. Exit ‘Road Mode’ by pressing and holding the
green button on the base of the joystick for 2 seconds
(Fig. 14)
.
2. Enter Field mode if required by pressing Button ‘D’ or the
top right button on the joystick (Fig. 15) .
3. ‘Auto Open’ the clamps by pressing the bottom left button
and pushing forward on the joystick
(Fig. 16)
. The guide will
also extend out fully. This should release the latch
mechanism. Check the guide light is flashing and the latch
pointer is aligned with the yellow sector of the decal
(Fig. 17).
Fig. 17 Note 1
If auto pickup is activated when the guide is in it wont work.
Fig. 17 Note 2
The Dotted Line position indicates the guide is out and the
pickup is free to operate.
Fig. 17 Note 3
The Pointer indicates that the guide is in and the pickup is
locked and ready for transport.
The indicator can in some circumstances indicate that the
guide is in. Whereas in fact the pickup has not been used
and has locked the latch in the transport position. Operate
the pick up return to check.
4. The forks (on newly delivered machines) will be bolted
down. If fork operation is required, undo these bolts. See
6.4 Use of Forks - page 26
. If not, ignore Instruction 5 and
proceed to instruction 6.
5. Hold down the bottom right button and push the joystick
forwards
(Fig. 18)
to bring the forks up. Keep the bottom
right button held down and move the joystick left (Fig. 19) ,
this will bring the forks to the front of the platform ready to
support the first bales.
12
Road Mode
Indicates ‘Field mode’ active
Or
Fig. 14
Fig. 15
Fig. 16
1 2
Fig. 17
Fig. 18
Fig. 19