NO
YES
NO
YES
Installation, Operation and Maintenance Manual
VCIOM-15345-EN Rev. 1
February 2022
49
Customizing Biffi EHO
Section 8: Customizing Biffi EHO
Figure 26
Change Settings (8)
Figure 27
Change Settings (9)
8.2.5
Please modify so that it shows the switch pointing to YES.
8.2.6
Once in a Setting Category, the LCD Seven will show the Setting and its value by
flashing between the Menu Key and the Setting’s value.
8.2.7
To navigate through the Settings, toggle the NO/YES Selector Switch to YES to
move to the next Setting.
8.2.8
To change a Setting’s value, toggle the NO/YES Selector Switch to NO.
8.2.9
Once in a Setting, the LCD Display will show the Setting and its value by flashing
between the Menu Key and the Setting’s value.
8.2.10
Toggle the NO/YES Selector Switch to NO to navigate through the Setting’s values
until the correct Setting’s value is found. Toggle the NO/YES Selector Switch to YES
to confirm the Setting’s value selected.
NOTICE
If an incorrect Passcode has been entered, the Biffi EHO Menu will return to the
[C][H] Menu item and the Passcode will have to be attempted again. Repeat the steps in
Section 8.2.2. to 8.2.3.6 to reattempt entering the correct passcode.
8.2.4
Toggle the NO/YES Selector Switch to navigate through the setting categories.
Toggle the NO/YES Selector Knob to YES to enter a setting category.
