Installation, Operation and Maintenance Manual
VCIOM-15345-EN Rev. 1
February 2022
7
Installation
Section 2: Installation
NOTICE
Failure to precharge the accumulator may cause the accumulator to not function properly.
!
CAUTION
Be aware, while preparing to and lifting the actuator, the Thermal Compensating Device
contains high-pressure nitrogen. Use care not to damage the Thermal Compensating
Device or its attachments.
2.4
Lifting the Biffi EHO Actuator
NOTICE
All Biffi EHO OLGA-H/OLGAS-H-Series or RPHD/RPHS-Series Considerations
When handling any Biffi EHO OLGA-H/OLGAS-H-Series or RPHD/RPHS-Series be
aware of tubing, accessories, handpump, accumulators, local display module and
control enclosures. Straps and chains can become entangled and cause damage to these
components. Never use chains on the spring cartridge as it may warp and cause the
actuator not to function correctly or may cause personal injury.
NOTICE
Do not use hydraulic tubing and electrical cable for lifting.
!
CAUTION
Be sure to use appropriately rated crane/hoist and straps/chains to raise and lower
the actuator.
