BIEMMEDUE Dusty 1100 ET, Руководство по эксплуатации и обслуживанию

Страница: 21 / 84

Technical data STH ET
Power Honda GX160 engine (hp)
5.5 ***
Starting motor power
12V 250W ***
Starting battery
12V 20Ah
Tank capacity (l) 3.6 ***
Drive hydraulic Electr. Mot.
Total installed power (W)
*** 1100
Total installed power (W) PLUS *** 1350
Main voltage
***
24 V DC
Battery duration (h) *
*** 3÷3.5
Type of batteries
***
No. 2
12V and
140 Ah
Battery charger
***
24V - 10A
Centr. brush motor
***
24V 300W
Suction motor
***
24V 120W
Vibrator motor
12V 40W 24V 60W
Traction motor
*** 24V 600W
Emptying motor 12V 250W 24V 250W
Maximum working slope
12% 12%
*: The duration of the batteries is calculated with new, recently
charged, perfectly operational batteries, operating on a smooth flat
surface with the brushes correctly adjusted.
3.4 Work parameters
The work parameters represent the information necessary to choose
the most suitable machine for the specific needs.
Parameters
Maximum theoretical productivity
(m
2
/h)
5000
Cleaning width mm
1100
Forward speed (km/h)
5,5
Reverse speed (km/h)
3
Capacity of debris collection bin
(l)
50
Filtering surface (m²)
3
Length of central brush (mm)
690
Diameter of central brush (mm)
260
Diameter of side brushes (mm)
400
Brush material* PPL
*: on request, brushes made from different materials can be fitted for
particular applications: contact the Manufacturer or dealer.
4 Safety parameters
4.1 Relevant technical regulations
The machine has been designed in accordance with community
regulations on machine safety.
4.2 Residual risks
In normal working conditions , there are no residual risks.
There are, however, residual risks always present during normal
working conditions exclusively in danger zones where access is
prevented by means of fixed or interblocked guards.
These guards must under no circumstances be removed while the
machine is in operation. Guards on transmission components may
be temporarily removed in order to carry out adjustments or routine
or extraordinary maintenance (for extraordinary maintenance,
always contact a professional service centre). The residual risks
generated under these conditions may be eliminated by adopting
certain procedures. When using the machine, the operator must be
seated in the driving position within reach of all operating controls
and with an adequate view of the path of the machine in order to
avoid impact with obstacles (danger of tipping over) and people
(injury to persons). The dust contained in the debris collection bin or
captured by the air filter may be damaging to persons affected by
chronic respiratory diseases. These persons must use suitable
respiratory P.P.D..
4.3 Noise
Guaranteed soud power level LwA 87 dB
4.4 Vibrations
The vibrations produced are minimal and do not represent a source
of danger for the operator. The levels have, however, been
determined in accordance with ISO 5349.
4.5 Degree of protection of electric machines
(IP)
Degree of protection against solid foreign bodies
(protected against dust)
3
Degree of protection against water (protected against
splashes of water)
3
4.6 Admissible environmental values
Admissible environmental values
Admissible
operating
temperatures
-10°C ÷ 50°C
(50° F ÷ 113° F)
Variations in ambient
temperature
Max. 1.1°C / min.
(Max 2°F / min.)
Relative humidity range 75% or less
Vibrations
≤
0.5 G
The machine may also be operated out of doors providing the
surface is asphalted, concreted or similar and dry.
IMPORTANT!: If the machine is used out of doors, the operator
must wear suitable clothing to protect from excessive cold or heat.
The machine may not be used in areas with an
explosive atmosphere Machinery and relative
components or equipment designed to operate in an
explosive atmosphere must be indicated with the
(ATEX) mark in accordance with EN 60079-14 (CEI 31-
33) "Electrical apparatus for explosive gas
atmospheres - Part 14: Electrical installations in
hazardous areas (other than mines)".
Use of machines with internal combustion engine in
closed or poorly ventilated environments (e.g.
greenhouses, warehouses, workshops, stalls, vertical
covered silos, etc) and the resulting combustion
fumes given off from the exhaust represent a risk of
intoxication and may cause injury or death.
4.7 Guards
All dangerous areas are closed with guards and protective devices
fixed to the chassis with screws making all hazardous areas
inaccessible to the operator. There is one mobile guard. The top
cowling on which the seat is mounted can be opened, but opening is
controlled by safety devices.
4.8 Safety devices
The machine is equipped with a double safety device under the seat
on the top cowling known as the "operator present" safety device. It
stops the engine when the operator voluntarily or involuntarily
vacates the seat and prevents the engine from being started up
unless the operator is in position on the seat where he has access to
all the machine controls. Both sensors must be working correctly to
allow the machine to start up.