- 59 -
INST
ALLA
TION
ADVANCED COMMISSIONING
8
ADVANCED COMMISSIONING
8.1 Enabling functioning of the
external temperature probe by
the remote control
Functioning with the external probe in the
boiler must be enabled if the remote control
(optional) is used.
Act on the programming of the REMOTE con
-
trol to enable its functioning if the remote con
-
trol (optional) is used.
•
Press button for more than 3 seconds to
enter in
mode.
Fig. 8.1
0
2
1
8
1
21
1 5
6
3
9
Press buttons
and
at the same time
to enter the transparent programming (Fig.
8.2).
Fig. 8.2
•
Press buttons
or
to display the
"PM15"
program that enables the external
probe (Fig. 8.3).
Fig. 8.3
•
Modify the programmed SET by pressing
buttons
or
until
a setting of 60
is
displayed, wait for the number programmed
to flash (Fig. 8.4).
Fig. 8.4
•
To exit programming, press button
.
8.2
Setting the K coefficient of the
external temperature probe
The boiler is set with a K coefficient equal to
zero for boiler functioning without the probe
connected.
If the boiler is
NOT EQUIPPED
with the re
-
mote control (optional) refer to Fig. 8.5.
