BHI HydroRam HK580S, Руководство по эксплуатации и список запасных частей

Страница: 9 / 54

BHI
Best Hammer Industries
- 4 -
2. Installation of Hammer
1) When installing the hydraulic hammer, an assistant who must be instructed by the
carrier operator is required. All directions and signals, etc. must be understood and
agreed on beforehand.
2) Only lifting equipment like crane should be used for transporting the hydraulic hammer.
3) The hydraulic hammer should be installed to the carrier with sufficient load
capacity. If the carrier is too light, it may become unstable and fall over.
4) Keep linkage and pin holes clear when installing the hydraulic hammer. Do not touch
any parts when the boom is moving. Never use your fingers to check the alignment of
the linkage.
5) Collect any oil which leaks out and dispose of it correctly.
6) Operation of the hydraulic hammer requires the installation of hydraulic pipe lines for
exclusive use of the hydraulic hammer.
7) The hydraulic system to the carrier must be checked by the authorized service
engineer before first operation and after any modifications.
8) After installation of hydraulic pipe lines, check the pressure and oil capacity. Check the
relief valve on the hydraulic system, which secures high pressurized accumulator. It
must have been approved by the relevant authority. Make sure that the pressure of
relief valve has been set correctly, i.e. to the maximum permissible operating pressure
of the hydraulic hammer.
Model
Unit HK580S
Relief Setting
Pressure
Kg/cm
2
/ [psi] 210 / [2985]
* The above relief setting pressures are subject to change - efficiency of the pump.
9) Check the connections of the hydraulic hammer and the hammer hoses.
10) The connecting threads must be undamaged and free of sand or similar foreign
body.