BHI HydroRam HK580S, Руководство по эксплуатации и список запасных частей

Страница: 21 / 54

BHI
Best Hammer Industries
- 16 -
5. Torque Chart [ Units: kg ․ m / N.m] / lb-ft ]
Item Torque
Tension Bolt 480kg.m / 4,700N.m / 3,472 lb-ft
Accumulator Cover Bolt 85kg.m / 830N.m / 610 lb-ft
Accumulator Assembly Bolt 170kg.m / 1,660N.m / 1,230 lb-ft
Top Mounting Bolt 230kg.m / 2,255N.m / 1,664 lb-ft
6. Blow Speed & Power Control
1) Blow Speed Control (Adjuster Valve)
(1) Standard turn initially set at the factory means
turning the adjuster counterclockwise after
being completely locked.
(2) Initial (standard) turn [Initial turn/(Total turn)]
Model HK580S
Turn
2 (10)
In case faster speed is needed than basic turn,
B direction => turn it counterclockwise
In case of slower speed is needed,
A direction => turn it clockwise
2) Blow(Striking) Frequency & Power contro
l ( Cylinder Adjuster Valve )
(1) Initial (standard) turn [Initial turn/(Total turn)] : 0 Turn
In case faster speed is needed than basic turn,
B direction =>Max. 2 turn it counterclockwise
In case of slower speed is needed,
A direction => turn it clockwise
DO NOT TURN THE CYLINDER ADJUSTER MORE THAN TWO(2) FULL TURNS FROM ITS
SEATED POSITION OR IT MAY BLOW OUT OF THE HAMMER CAUSING INJURY OR DEATH TO
ANYONE IN THE VICINITY!
3) Blank Firing Prevention system
(1) Initial (standard) turn [Initial turn/(Total turn)] : 0 Turn
(2) In case of Blank Firing Prevention system :
B direction => Max. 2 turn it counterclockwise