BH FITNESS YC2000, Руководство пользователя

Страница: 10 / 27

10
Only the Time and Pulse rate function
read-outs will remain displayed. The
electronic device will measure your
pulse rate during this minute. The
heart rate recovery time will be
displayed on the Heart rate line. If, at
any time during this minute, you
decide to abandon this test then
press the “Test” button and this will
take you back to the main screen.
When the minute is up, the electronic
device will work out the difference
and your fitness rating will be
displayed up on the screen:
“A+,A,B+,B,C+,C”; where A+ is the
best (fitness “Excellent”) and C the
worst (fitness “Very Poor”).
Pressing the TEST button will take
you back to the main screen, where
the functions will be in the same mode
as when the TEST began.
Your fitness rating is a guideline that
shows you how fast your heart
recovers after physical exertion. If you
exercise regularly then you will see
your fitness rating improve.
The TEST will not work if you do not
have both hands placed on the hand-
grip sensors (R) Fig3 after you have
stopped doing the exercise.
If the error code “ERROR” is shown
on the screen then this means that
you do not have your hands
positioned correctly on the hand-grip
sensors (R).
TROUBLESHOOTING GUIDE
Problem: The display comes on but
only the Time function Works.
Solution:
a.-Make sure that the connection
cable is connected.
Problem: The monitor does not
switch on.
Solution:
a.- Check the monitor cable
connections.
b.-Check the cable connections for
the main post.
Avoid leaving the electronic monitor
in direct sunlight as this might
damage the liquid crystal display.
Similarly, do not expose it to water or
knocks.
Do not hesitate to get touch with the
Technical Assistance Service if you
have any queries by phoning customer
services (see last page in manual)
THE MANUFACTURER RESERVES
THE RIGHT TO MODIFY THE
SPECIFICATIONS OF ITS
PRODUCTS WITHOUT PRIOR
NOTICE