15
FAULT FINDING CHART
PROBLEM
CHECKS
SOLUTIONS
1. The monitor
does not switch
on.
1)Make sure that the machine is
plugged in, the ON/OFF switch
in position I and that the safety
key is inserted.
1) Plug the machine into
the mains supply.
Set
the
switch
to
position I and insert the
safety key.
2. The monitor
switches on but
the motor fails to
start.
2) Check that the current limiter
is pressed in.
2)Switch the machine off
and press the circuit
breaker in. Lubricate the
treadmill band.
3. Walking motion
is jerky on the
treadmill
3.a) Check that the belt is
lubricated.
3.b) Check the tension on the
sliding belt.
3.c) Check the tension on the
drive belt.
3.a) Lubricate the sliding
belt.
3.b) Adjust the belt
tension.
3.c) Adjust the drive belt
tension.
4. The machine
stops (the breaker
trips)
4) Check that the band is
lubricated
4)Reset the overload
button with the On/Off
switch
at
“0”
and
lubricate the treadmill
band.
5.
Electrical
shocks
through
the handrail.
5) Check that the machine is
plugged into an earthed mains
socket.
5) Plug the machine into
an
earthed
mains
socket.
6. The treadmill
belt skews off
centre
6.a) Check that the machine is
level on the floor
6.b) Check that the machine
does not wobble.
6) Use the adjustable
feet
to
level
the
machine.
ERROR CODES
Monitor screen displays E1
- Speed sensor fault.
Monitor screen displays E6-E7 - Elevation fault
Do not hesitate to get in touch with us if you have any queries, by calling:
902 170 25
Содержание G-639
Страница 2: ...Fig 1 Fig 2 Fig 3 Fig 4 Fig 5 ...
Страница 3: ...Fig 6 Fig 7 Fig 8 ...
