24
Deleting individual users
Switch on the scale, select the user using the UP button and wait until “0.0 kg” appears; press the Mode
button for 6 seconds until “DEL” appears.
Replacing the batteries
Your scale is equipped with a low battery indicator. If you operate the scale with flat batteries, “Lo” will
appear on the display and the scale will automatically switch off. In this case, the batteries must be
replaced (3 x 1.5 V AAA).
NOTE:
• When replacing the batteries, use batteries of the same type, make and capacity.
• Do not use rechargeable batteries.
• Use batteries free from heavy metals.
8. Cleaning and maintenance
The device should be cleaned from time to time.
This should be done using a damp cloth and, if necessary, a small amount of detergent.
IMPORTANT
• Never use abrasive solvents or cleaning products!
• Never submerge the device in water!
• Do not clean the device in a dishwasher!
9. What if there are problems?
Display
Cause
Solution
“
”
Unknown measurement as it
is outside the user assignment
limit or a unique assignment is
not possible.
Select your user by pressing the / but-
tons.
BF-
The proportion of fat is outside
the measurable range (less
than 3% or greater than 65%).
Please repeat the measurement barefoot, or
with the soles of the feet lightly dampened
if necessary.
Maximum weight capacity of
180 kg exceeded.
Loads must not exceed 180 kg.
or incorrect weight
is displayed.
No even, hard surface.
Place the scale on an even, hard surface.
or incorrect weight
is displayed.
Not standing still.
Stand as still as possible.
Incorrect weight is dis-
played.
Incorrect zero point of scale.
Wait until the scale switches itself off. Acti-
vate the scale, wait for “0.0 kg” to appear
and take the measurement again.
