7
4. HANDLING AND TRANSPORTATION OF THE UNPACKED
MACHINE
The procedure for the safe handling of the machine is the following:
1. If the machine is in operation, turn it off via the main switch (1)
(Fig.1).
2. Empty the recovery tank.
3. Empty the solution tank.
4. Remove the battery (2) from the machine. To remove the battery,
slide the stop lever (3) in the direction of the arrow (Fig.2).
5. Remove the battery from the machine using the handle molded into
it (Fig.3).
6. Lock the handle in the horizontal position. Rest your foot on the
main part of the machine to prevent it from tilting, then push the
handle away from you until it snaps into the horizontal position
(Fig.4).
7. Rotate the stop lever of the handle (4) in the direction of the arrow
(Fig.5).
8. Collapse the handle by pushing the handle (5) towards the main
part of the machine (Fig.6).
9. Rotate the lock lever of the handle (4) in the direction of the arrow
(Fig.7).
10. To raise the device off the floor, use the handle (6) at the back of the
machine (Fig.8).
MACHINE PREPARATION