6
MACHINE PREPARATION
1. HANDLING THE PACKED MACHINE
Total weight is 40 lbs. per box.
Overall dimensions are:
A: 10.6 in (270 mm)
B: 19.2 in (487 mm)
C: 27.5 in (698 mm)
2. HOW TO UNPACK THE MACHINE
1. Place the lower part of the outer packaging in contact with the floor.
2. Open the outer box.
3. Remove the accessories from the box and carefully lay them on the ground.
4. Take the MotoMop out of the box.
3. MACHINE ASSEMBLY
1. Take the package to the maintenance department.
2. Remove the MotoMop and all the accessories from the box.
3. Insert the lower tube (1) of the control handle into the hole on the joint (2) (Fig.1).
4. Attach the handle to the joint using the screw and nut (3), making sure the hole in the handle aligns with the hole on the joint
(Fig.2).
5. Lock the handle in the horizontal position. Rest your foot on the main part of the machine to prevent it from tilting, then
push the handle away from you until it snaps into the horizontal position (Fig.3).
6. Rotate the stop lever of the handle (4) in the direction of the arrow (Fig.4).
7. Collapse the handle by pushing the handle (5) towards the main body of the machine (Fig.5).
8. Rotate the lock lever of the handle (4) in the direction of the arrow (Fig.6).
