8
MACHINE PREPARATION
5. CHARGING THE BATTERY
The battery must be charged prior to the first use, and when it is discharged from use. To recharge the battery, proceed as
follows:
1. Take the machine to its battery recharging area.
2. If the machine is working, turn it off via the main switch (1) (Fig. 1).
3. Lock the handle in the vertical position.
4. Read the battery charger manual (supplied with the device) before inserting the power plug (2) in the power supply unit (3)
(Fig.2).
5. Plug the power plug (2) into an appropriate electrical outlet.
6. Remove the cap (5) covering the battery power socket (Fig.4).
7. Insert the battery charger power cable plug (6) in the socket (7) on the battery (Fig.5).
8. Perform a complete battery charging cycle.
9. Once the charging cycle is completed, remove the plug (2) on the battery charger from its electrical power outlet.
10. Take the power cable plug (6) out of the socket (7) on the battery.
11. Insert the cap (5) that covers the battery power socket.
6. CONNECTING THE BATTERY
Insert the battery (6) in the battery compartment (7) in the rear part of the machine (Fig.7).
Push the battery until the uncoupling lever (8) locks into place.
