Betafence Robusta, Руководство по установке

Страница: 20 / 21

Bekamatic
®
Industry
ed. April 2006 ENGLISH
20/21
1. Configuration Mode
To prevent unauthorised change of the control parameters, this option is password protected.
The password is entered in the following way:
Set the selector switch on position 4
Press the [
·
]-key once, the display will read [P1]
Set the selector switch on position 7
Press the [
·
]-key once, the display will read [P2]
Set the selector switch on position 3
Press the [
·
]-key once, the display will read [P3]
Set the selector switch on position 5
Press the [
·
]-key once
The decimal point indication on the right display will start to blink, which means that you
are in the parameter configuration mode.
Remark:
If the procedure was not executed correctly, the controller will return to normal display
mode. Also, if you wait too long (more than 25s) to continue the password procedure, the
controller will return to normal display mode.
2. Special function mode
Put the controller in configuration mode as described in part 1
Set the selector switch on position 0
Press the [
·
]-key once
The two decimal points will blink simultaneously
Put the selector switch on 6
S.L. Is displayed => Self-Learn
Press the [
·
]-key, the gate will now start the Self-Learning.
The gate is now ready for use.
To have personalized parameter setting follow the procedure as indicated in the technical
handbook:
INTELLIGENT GATE CONTROL
IGC-300
THE GATE CAN NOW OPERATE AUTOMATICALY.
60761BM IM Ind_ENG.indd 20 60761BM IM Ind_ENG.indd 20 08-05-2006 09:11:19 08-05-2006 09:11:19