Bekamatic
®
Industry
ed. April 2006 ENGLISH
15/21
9. Adjustment of the correct motor pressure
1. Put the wing in the position that it is supported by the
rear guiding wheels and the wheels at the position of
the guiding post.
2. Turn the threaded rod clockwise.
3. Move the wing slightly back and forward. This will
prevent pushing a tooth of the dental wheel on top of
a tooth of the dental rack instead of gripping in each
other.
4. When, while turning the threaded rod, the vertical
movement of the drive stops, you must turn the rod in
for another 8 mm. This is the correct motor pressure.
Hint: the threaded rod is M12, so 4½ turns is
approximitly 8 mm.
5. Put back the cover plate underneath the door.
G
60761BM IM Ind_ENG.indd 15
60761BM IM Ind_ENG.indd 15
08-05-2006 09:11:17
08-05-2006 09:11:17
