Bekamatic
®
Industry
ed. April 2006 ENGLISH
12/21
7. Gates with a free passage more than 6m00 have a support roll for the wing in open position.
Install that roll on the foundation as described as hereunder.
A correct adjustment of this roll is indispensable for a good functioning of a motorised
cantilever-sliding gate Bekamatic.
The adjustment is required as well for the correct height of the support roll as for the
perpendicular of the support roll towards the under beam of the wing.
A support roll installed too high will add undesired friction forces on the wing which are
increasing the further the wing is opened.
The height of the support roll must be adjusted when
the wing is approximately at 50 cm from completely
open position
At this position the support roll may make contact with
the underside of the under beam. Adjust the height
when necessary
G
Do not adjust the
tension system!
Support roll
Rear guiding
wheels
Guiding wheels
in the guiding
post
OK
Not OK
90°
< 90°
60761BM IM Ind_ENG.indd 12
60761BM IM Ind_ENG.indd 12
08-05-2006 09:11:16
08-05-2006 09:11:16
