manualshive.com logo in svg

Beta Marine BetaGen 10, Руководство по установке

Поделиться
Скачать
Beta Marine BetaGen 10 Скачать руководство пользователя страница 58

56

CONTROL MODULE OVERVIEW

{

DSE7310 MK II CONTROL MODULE & DSE7310 MK II 
DISPLAY MODULE FOR LOCAL & REMOTE OPERATION

OPTIONAL FOR ALL BETASET-BETAGEN MODELS

The DSE7310 MK II is an Auto Start Control Module 
suitable for a wide variety of single, diesel generating 
set applications. Monitoring an extensive number of 
engine parameters, the module will display warnings, 
shutdown and engine status information on the back-lit 
LCD screen, illuminated LEDs, remote PC and via SMS 
text alerts (requires optional external modem). The 
module includes USB, RS232 and RS485 ports as well as 
dedicated DSENet® terminals for system expansion.

The module is compatible with electronic (CAN) and 
non-electronic (magnetic pick-up/alternator sensing) 
engines and offers an extensive number of fl exible 
inputs, outputs and extensive engine protections so 
the system can be easily adapted to meet the most 
demanding industry requirements.

The extensive list of features includes enhanced event 
and performance monitoring, remote communications, 
PLC functionality and dual mutual standby to reduce 
engine wear. The module can be easily confi gured using 
the DSE Confi guration Suite PC software. Selected front 
panel editing is also available.

The DSE7310 MK II has engine control and monitoring 
functions including manual engine start, automatic 
engine start with timed preheat, engine stop, engine 
hours run meter, over speed, low lubricating oil 
pressure

*

 and high water coolant temperature

*

.

Up to three DSE7310 MK II display modules can be 
connected to a DSE7310 MK II control module, each 
can be positioned up to a maximum distance of 1km 
away. Each display module will remotely offer exactly 
the same instrumentation, control and monitoring 
capabilities as the host control module, including 
starting and stopping of the engine.

*

Automatic shutdown protection on fault function.

240mm

181mm

220mm

160mm

Beta Marine

Generating Set

DSE7310 MK II Local

Control Module

DSE7310 MK II Display

Control Module

NB: This control module has its own independent 
operators manual.

IMPORTANT!

BOTH DSE3310 & DSE7310 MK II MODULES 
ENSURE THAT ACCIDENTAL CONTACT WITH THE 
GENERATOR OUTPUT SUPPLY CANNOT HAPPEN.

NB: ALWAYS FIT A SHIELD OR THE BETA MARINE 
COVER ON TO THE BACK OF THE MODULE.

Содержание BetaGen 10





















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды