WARNING- RISK OF ELECTRIC SHOCK
–
This product cannot be using while people
are inside the pool.
WARNING- TO REDUCE THE RISK OF
INJURY,
do not permit children to use this
product unless they are closely supervised
at all times.
WARNING- RISK OF ELECTRIC SHOCK.
Connect only to a grounding type receptacle
protected by a ground-fault
circuit-interrupter (GFCI). Contact a
qualified electrician if you cannot verify that
the receptacle is protected by a GFCI.
CAUTION-
To reduce the risk of electric
shock the pool must be installed no closer
than 6 feet (1.8 m) from any electrical outlet.
Do not place portable appliances closer
than 5 feet (1.5 m) from the pool.
WARNING:
This product is not intended to
be bonded to the equipotential bonding grid.
DO NOT BURY CORD
. Locate cord to
minimize abuse from lawn mowers, hedge
trimmers, and other equipment.
WARNING-
To reduce the risk of electric
shock, replace damaged cord immediately.
WARNING-
To reduce the risk of electric
shock, do not use extension cord to connect
unit to electric supply; provide a properly
located outlet.
CAUTION-
This product is for use with
storable pools only. Do not use with
permanently-installed pools. A storable pool
is constructed so that it is capable of being
readily disassembled for storage and
reassembled to its original integrity. A
permanently-installed pool is constructed in
or on the ground or in a building such that it
cannot be readily disassembled for storage.
CAUTION-
For continued protection against
possible electric shock this unit is to be
mounted to the base in accordance with the
installation instructions.
IMPORTANT -
Using this product with an
unmatched electrical supply is dangerous
and will result in catastrophic failure of this
product.
RISK OF ELECTRIC SHOCK -
When
working with electricity, turn the electrical
power off at the circuit breaker and lock
breaker door. Failure to do so will result in
increased risk of shock, injury and possibly
death.
DO NOT REMOVE THE GROUNDING
PRONG OR MODIFY THE PLUG IN ANY
WAY. DO NOT USE ADAPTOR PLUGS.
Consult a qualified electrician for any
questions related to the validity of your
plugs grounding. Handle this product with
care. Do not pull or carry this product by the
power cord. Never pull a plug from the
outlet by yanking the power cord. Keep cord
free from abrasions.
Sharp objects, oil, moving parts, and heat
should never be exposed to this product.
NOTE:
Please examine equipment before
use. Notify Bestway at the customer service
address listed on this manual for any
manufacturing defect or missing parts at the
time of purchase. Verify that the equipment
components represent this product model
that you had intended to purchase.
NOTE:
Place this product on a solid and
level ground. Pay attention to position of
pool and this product, so adequate
ventilation, drainage, and access for
cleaning is available. Never place this
product in an area that may accumulate
water, or in an area where foot traffic will
flow around the pool.
NOTE:
Atmospheric conditions may affect
the performance and life span of this
product. Unnecessary wear and tear may
occur during periods of cold, heat and
exposure to sun. Whenever possible shelter
this product from these conditions.
NOTE:
Assembly and disassembly of this
product should only be performed by adults.
WARNING:
If the supply cord is damaged, it
must be replaced by the manufacturer, its
service agent or similarly qualified persons
in order to avoid a hazard.
WARNING:
Electric installations should
follow national wiring rules, consult a
qualified electrician with any questions.
WARNING:
This appliance is not intended
for use by persons (including children) with
reduced physical, sensory or mental
capabilities, or lack of experience and
knowledge, unless they have been given
supervision or instruction concerning use of
the appliance by a person responsible for
their safety.
Children should be supervised to ensure
that they do not play with the appliance.
• CSA ENCLOSURE 3
• FOR USE WITH SWIMMING POOLS
ONLY.
•
CAUTION:
TO ENSURE CONTINUED
PROTECTION AGAINST SHOCK
HAZARD, USE ONLY IDENTICAL
REPLACEMENT PARTS WHEN
SERVICING.
•
WARNING:
RISK OF ELECTRIC SHOCK.
CONNECT ONLY TO A GROUNDING
TYPE RECEPTACLE.
•
CAUTION:
THIS PRODUCT IS FOR USE
WITH STORABLE POOLS ONLY - DO
NOT USE WITH
PERMANENTLY-INSTALLED POOLS.
•
CAUTION:
CONNECT ONLY TO
GROUNDING TYPE RECEPTACLE
PROTECTED BY A CLASS A GROUND
FAULT CIRCUIT INTERRUPTER.
•
CAUTION:
FOR CONTINUED
PROTECTION AGAINST POSSIBLE
ELECTRIC SHOCK THIS UNIT IS TO BE
MOUNTED TO THE BASE IN
ACCORDANCE WITH THE
INSTALLATION INSTRUCTIONS.
•
WARNING
– RISK OF ELECTROCUTION
1) Connect Only To Properly Grounded
Outlet. Do Not Remove Ground Pin
2) Inspect Cord Before Using – Do Not Use
3
2
6
7
If Cord Is Damaged.
3) Keep Ground-Fault Circuit-Interrupter Dry
And Off The Ground
4) Do Not Touch Plug With Wet Hands
5) Double Insulated – When Servicing Use
Only Identical Replacement Parts.
6) Read Instruction Manual Before Using.
DO NOT REMOVE THIS TAG
SAVE THESE INSTRUCTIONS.
INTRODUCTION
Common salt (sodium chloride) is made up of two elements,
sodium and chloride. During the installation of your chlorinator, a
measured quantity of salt is dissolved in the pool water to create
a mild saline solution. As part of the daily filtration cycle, the pool
water is passed through the chlorinator’s electrolytic cell to
produce chlorine which is dissolved instantly in the water. In
simple, non-technical terms, the chlorine instantly starts to
destroy bacteria, algae and oxidizes other organic materials.
• Electrolytic Cell (with Titanium Plates)
The electrolytic cell contains bipolar titanium electrodes which
perform the electrolysis and produce chlorine when energized
with DC current. Chlorine is generated as pool water containing
salt passes through the cell.
• Flow Sensor
The flow sensor protects the electrolytic cell and assures there
will always be adequate water flowing through the cell.
• Control Panel
The chlorinator includes a electronic control panel with buttons
and LED indicators to control the chlorinator and produce
chlorine at the defined operating hours.
PARTS REFERENCE
Before assembly, take a few
minutes to become familiar
with all the parts.
NOTE:
Drawings for
illustration purpose
only. May not reflect
actual product.
Not to scale.
SPECIFICATIONS
Electrolytic Cell Line Cord
Electrolytic Cell
Control Panel
Power Cord
Flow Sensor
Water Inlet
110-120V AC
14V DC
1.5A
12 grams/hour
700~4000gallons/hour (2650~15140L/h)
2500 ppm (2.5g/L)
10-35°C (50-95°F)
5-40°C (41-104°F)
Rated Voltage:
Electrolytic Cell Working Voltage:
Wattage:
Maximum Chlorine Output/hour:
Flow Rate Range:
Recommended Salt Level:
Water temperature
Ambient temperature
S-S-004379