P5 - 44941 Rev. A 1216
Installation Instructions - Rear Bumper End Caps
© 2016 Bestop, Inc.
Page 5
Holes Must Align
when end of bracket is flush
with frame member
Step 1
Step 2
Step 1
Hardware
Tools
Step 2
When the holes in the Bumper Bracket and
vehicle frame members are aligned, slide the
bumper over the vehicle frame members,
making sure that the holes in the Bumper
tabs align with the holes in the vehicle frame
members and Bumper Brackets.
Make sure that the holes in the Bumper
Brackets are aligned with the holes in the
vehicle frame.
M12-1.75x55
Hex Head Bolt
Part #518.68
Qty. 6
(from Bumper kit)
12mm Flat Washer
Part #414.17
Qty. 6
(from Bumper kit)
Section 5
Re-Attach Bumper to Vehicle
Socket wrench
and 19mm socket
