BERTHOLD TECHNOLOGIES Uni-Probe LB 490, Руководство пользователя

Страница: 516 / 730

38477BA2B
5 – 516
25.5.09
6 Functional Processes Volume 5
6.2
Changing the Uni-Probe Password
Passwords rule out that parameters can be changed by unauthor-
ized persons. To allow you to check the Uni-Probe even in the
locked status, the levels live display and view parameter are not
password-protected and are therefore always accessible.
On these levels, parameters can be read, but not edited.
In the Uni-Probe you can clear parameter levels specifically.
Up to 3 different passwords can be used. Passwords may even be
identical; in this case, they open several levels at the same time.
Select
DEVICE/PASSWORD
to edit passwords.
Clear access
If the password has not already been changed by the user, you can
grant access to all levels with the standard password
UNIPROBE
.
Block access
By entering
00000000
all levels containing parameters that can be
changed, are locked.
The table shows that a higher level also unlocks the levels below it.
For example, if password 3 has been cleared, access to all levels
below it is also granted.
Prerequisite for changing the password is that you have access to
the
CHANGE PASSWORD
level.
liv
e d
is
p
la
y
vi
ew
p
a
ra
m
e
ter
Co
nf
ig
ura
ti
o
n
CO
NF
IGURA
T
IO
N
&
CA
LI
B
R
A
T
IO
N
Ser
v
ice
Ch
an
g
e
P
a
ss
wo
rd
Password 3 Full Access X X X X X
Password 2 Configuration &
Calibration X X X X
Password 1 Configuration X X X
00000000 Read only X
Access to level
Password Description