Berker 7531 40 18, Руководство по эксплуатации

Страница: 43 / 100

43
GB
Operation
Deactivating the permanent manual control mode
The device is in the permanent manual control mode.

Press the key for at least 5 s.
LED is off, bus mode is activated.
Depending on programming, the blinds/shutters move to the posi-
tion active at the time of deactivation of the manual control mode,
e.g. forced-control position, safety or sun protection position.
Operating the outputs
The device is in the permanent or temporary manual control
mode.

Press the key briefly < 1 s several times until the desired
output is selected.
The LEDs of the selected output
A1...A8
are flashing.
The LEDs
▲
and
▼
indicate the status.

Controlling the output with the
▲
or
▼
key.
Brief press: blind/shutter stop
Long press: blind/shutter up/down