Berker 7531 40 18, Руководство по эксплуатации

Страница: 42 / 100

42
GB
Operation
Deactivating the temporary manual control mode
The device is in the temporary manual control mode.

No key-press for 5 s.
- or -

Press the key briefly < 1 s several times until the actuator quits
the temporary manual control mode.
LEDs A1...A8 are no longer flashing, but indicating the output
status.
Depending on programming, the blinds/shutters move to the posi-
tion active at the time of deactivation of the manual control mode,
e.g. forced-control position, safety or sun protection position.
Activating the permanent manual control mode
Keypad operation is programmed and not disabled.

Press the key for at least 5 s.
LED is on, LEDs A1 are flashing, permanent manual mode
is activated.