Berker 7531 40 18, Руководство по эксплуатации

Страница: 60 / 100

60
Help in case of trouble
GB
Manual control with keypad not possible
Cause 1: manual control mode not programmed.
Program the device for manual control.
Cause 2: manual control mode disabled from bus.
Enable the manual control mode.
Output control not possible
Cause 1: output disabled.
Re-enable the output.
Cause 2: forced-control position, safety function or sun protec-
tion active for the output concerned.
No control operation possible for this output as long as primary
functions are active.
Cause 3: Electronic drive with high-impedance input connected
to the device.
Connect the N conductor for the respective output.
Observe the connecting instructions. Observe the maximum dty
cycle (Technical Data). The connection of the N conductor to the
device and the activation of the output concerned by retriggering
for a prolonged time without interruption may cause inadmissible
heating of the device.