9
ASSEMBLY
Insert the male section of the driveline kit (item 3;
700275 kit) into the rotary broom’s driveline (item 4) by
aligning the stamped mark (item 1) with the large groove
(item 2).
Only one position allows the shafts to be inserted into
one another.
STEP 3
ROTARY BROOM INSTALLATION:
Refer to rotary broom owner’s manual, parts
breakdown section for parts identification.
WARNING
TO PREVENT INJURIES:
Stop the motor.
Apply parking brakes.
Remove the ignition key.
Disconnect the wire from the spark plug(s) and
keep away from spark plug(s) to prevent accidental
starting.
Install the driveline
DANGER
If the driveline is not completely covered, be sure
a guard extension is installed.
Do not operate without driveline completely
covered by the shield.
DANGER
ROTATING DRIVELINE
Contact can cause death.
KEEP AWAY
Do not operate without:
-All driveline, tractor & equipment shields in
place.
-Driveline securely attached at both ends.
WARNING
FOR YOUR SECURITY:
Read the rotary broom owner's manual for safety
precautions and rules.
Follow the assembly and operation instructions.
