
11
Lower the rotary broom to the ground.
Adjust the extension guard (item 4) by screwing the bolt
(item 1) so that it is parallel with the driveline.
Tighten firmly.
Be sure that the guard does not come into contact with
the driveline when the rotary broom is raised.
ASSEMBLY
Install handle
Adjust the extension guard
VERIFY TIRE PRESSURE:
Tire pressure must be even on both sides of the
tractor according the vehicle's owner manual.
Install the handgrip (item 2) on the handle (item 1).
Insert the handle (item 1) through the support (item 3)
and onto the extension (item 4) as shown.
Secure with a 2.5 mm hair pin (item 5).
Insert the extension (item 4) into the control rod (item 6)
and secure with a 2.5 mm hair pin (item 5).