2
ASSEMBLY
Install the new male hitch
Install the new male hitch (item 2) from this kit (it is
longer) with four hex bolts 7/16" n.c. x 1 1/4" (item 3;
previously removed) and nylon insert lock nuts
7/16" (item 4; supplied with the kit).
Tighten firmly.
Secure the tension bar (item 5) with two hex bolts 5/16"
n.c. x 2 1/4" (item 6; heads from the bottom) and flange
nuts 5/16" n.c. (item 7).
Tighten moderately.
Reinstall the assembled power take off support (item
8).
HALF TELESCOPIC DRIVELINE:
Install the male half telescopic driveline (item 9) into
the male half drive line (item 10).
SEE SNOWBLOWER OWNER’S MANUAL
INSTALLATION INSTRUCTIONS.
Reinstall the driveline guard (item 1).
