Bercomac 700370-3, Руководство пользователя, Страница: 19 / 36

17
ASSEMBLY
Insert the handle (item 1) into the support (item 2) as
shown.
Install the hook (item 3) on the rotation worm (item 4).
Insert the hook in the handle (item 1) and secure with a
2.5 mm hair pin (item 5).
VERIFY SKID SHOE ADJUSTMENT:
LEVEL PAVED SURFACE: Adjust skid shoes to allow
3/16 to 1/4" clearance (A) between cutting edge and
surface.
UNEVEN OR GRAVEL SURFACE: Adjust skid shoes
to allow 1/2 to 5/8" clearance (A) between cutting edge
and surface.
VERIFY TIRE PRESSURE:
Check and adjust tractor tire pressure as follows:
Front tires: 20-25 psi
Back tires: 8-10 psi
Tire pressure must be even on both sides of the
tractor.
Adjust skid shoes
Install handle
CAUTION
TO PREVENT INJURIES:
Always raise the attachment to reduce the
tension on the spring before applying or
releasing tension on the helper spring. Firmly
hold the handle when you release the tension
because the arm will kick back due to the tension
on the spring.
Reinstall the helper spring as originally installed.
Raise the snowblower and pull up the tension arm
(item 1). This spring helps to lift the snowblower with
little effort.
Apply tension to spring