Bercomac 700370-3, Руководство пользователя, Страница: 12 / 36

10
Replace front supports
SUBFRAME PREPARATION FOR THE JOHN
DEERE TRACTORS
MODELS: GT325, 335, 345, 355
GX 325, 335, 345, 355
IMPORTANT: TORQUE ALL BOLTS ACCORDING
TO TORQUE SPECIFICATION TABLE (SEE TA-
BLE OF CONTENTS) WHEN STATED: TIGHTEN
FIRMLY. REFER TO PARTS BREAKDOWN SEC-
TION FOR PARTS IDENTIFICATION.
NOTE:
The mower deck must be removed to install
the subframe.
Replace the front supports (items 1 & 2) by the other
supports (items 3 & 4) that are included in this kit. Re-
install in the same fashion as the supports you re-
moved, but the fold towards the inside and insert a
shim (item 5) between the supports and the subframe
flat bars.
Insert the bolts (item 6) in the holes as shown.
Tighten the bolts firmly.
ASSEMBLY
Remove the bolt that holds the left hand side mower
lift arm (item 1). Reinstall the lift arm by inserting as
shown the mounting pin (item 2), original sleeve (item
4) and flat washer (item 3) from the tractor.
Secure with the original nut inside the tractor frame.
Do the same operation on the right side.
Tighten firmly.
Install handle support