Bercomac 700370-3, Руководство пользователя, Страница: 14 / 36

12
ASSEMBLY
Install lift arm
Install the lift arm (item 1) to the lift arm extension
(item 2) with two 5/16 x 3/4" bolts and flange nuts.
Tighten firmly.
Install the handgrip (item 3) as shown.
Pull lift arm towards the rear of tractor.
The arm should be 1" outside the mud guard and 2
1/2" above the tire. If not, adjust the arm by unscrew-
ing the bolt (item 4).
IMPORTANT: When adjusted properly, tighten bolt
(item 4) very firmly with hinge handle or a torque
wrench at 85-90 lbs/ft.
Replace front supports
SUBFRAME PREPARATION FOR THE SABRE
TRACTORS
MODELS:GT1842, 1848, 2048, 2148, 2254, 2354,
2554 (GH or HV)
IMPORTANT: TORQUE ALL BOLTS ACCORDING
TO TORQUE SPECIFICATION TABLE (SEE TA-
BLE OF CONTENTS) WHEN STATED: TIGHTEN
FIRMLY. REFER TO PARTS BREAKDOWN SEC-
TION FOR PARTS IDENTIFICATION.
NOTE:
The mower deck must be removed to install
the subframe.
Replace the front supports (items 1 & 2) by the other
supports (items 3 & 4) that are included in this kit. Re-
install in the same fashion as the supports you re-
moved, the fold towards the outside.
Insert the bolts (item 5) in the holes as shown.
Tighten the bolts firmly.