BENSHAW RediStart MX3 Series, Руководство пользователя

Страница: 218 / 238

210
APPENDIX F - MODBUS REGISTER MAP
Absolute Register Address Description Range Units
30025/40025 Alarm Status 3
Bit 0: “A 64” – DI 5
Bit 1: “A 65” – DI 6
Bit 2: “A 66” – DI 7
Bit 3: “A 67” – DI 8
Bit 4: “A 71” – Analog Input Trip
–
30026/40026 Lockout Status
Bit 0: Motor overload
Bit 1: Motor PTC
Bit 2: RTD Stator
Bit 3: RTD Bearing
Bit 4: RTD Other
Bit 5: Disconnect open
Bit 6: Stack overtemperature
Bit 7: Control power
Bit 8: RTD Open/Short
Bit 9: Time between starts
Bit 10: Backspin
Bit 11: Starts per hour
Bit 12: RTD Comm Loss
–
30027/40027 Present Fault Code
30028/40028 Average Current A
rms
30029/40029 L1 Current A
rms
30030/40030
L2 Current
A
rms
30031/40031 L3 Current A
rms
30032/40032 Current Imbalance 0.1 %
30033/40033 Residual Ground Fault Current % FLA
30034/40034 Zero Sequence Ground Fault Current 0.1 Arms
30035/40035 Average Voltage V
rms
30036/40036 L1-L2 Voltage V
rms
30037/40037 L2-L3 Voltage V
rms
30038/40038 L3-L1 Voltage V
rms
30039/40039 Motor Overload %
30040/40040 Power Factor
-99 to +100
(in 16-bit two’s compliment signed format)
0.01
30041/40041 Watts (lower 16 bits)
(in 32-bit unsigned integer format) W
30042/40042 Watts (upper 16 bits)
30043/40043 VA (lower 16 bits)
(in 32-bit unsigned integer format) VA
30044/40044 VA (upper 16 bits)
30045/40045 vars (lower 16 bits)
(in 32-bit two’s compliment signed integer
format)
var
30046/40046 vars (upper 16 bits)
30047/40047 kW hours (lower 16 bits)
(in 32-bit unsigned integer format)
kWh
30048/40048 kW hours (upper16 bits)
30049/40049 Phase Order
0: no line
1: ABC
2: CBA
3: SPH
–
30050/40050 Line Frequency
230 – 720, or 0 if no line
0.1 Hz
30051/40051 Analog Input %
-1000 to +1000
(in 16-bit two’s compliment signed format)
0.1 %
30052/40052
Analog Output %
0 – 1000
0.1 %
30053/40053 Running Time
0 – 65535
hours
30054/40054 Running Time
0 – 59
minutes
30055/40055 Starts
–
30056/40056 TruTorque % %
30057/40057 Power % %