2 *+,-
2 *+,-
2 *+,-
2 *+,-
Change weight value to "a"(10), then screen will be like below figure:
After press "SPACE" to return to QoS submenu, user can set the weight
value for low priority by the same policy.
2. TCI THRESHOLD.
Use can change the threshold for 802.1p frame. Allowable threshold value
range is 0~7. If 802.1p frame pri[2:0] >= TCI THRESHOLD then it will be
qualified as high priority frame. For example, to change TCI THRESHOLD
to 6, do the following steps: Press [T] to enter TCI THRESHOLD menu,
then enter 6 for TCI THRESHOLD value, refer to the figure below:
Содержание SE0224
