![background image](http://html1.mh-extra.com/html/benq/se0224/se0224_user-manual_2734435034.webp)
2 *+,-
2 *+,-
2 *+,-
2 *+,-
Following the same policy, user can set port 15 as Trunk group 5's members.
And the status should be like the following figure:
3. Set Forwarding Table.
For all ports except trunking ports, they have to assign one forwarding
table. The forwarding table is used to indicate which specific port in the
trunk group will actually be assigned to take the traffic loading to this
trunk. For the above example in chip 1's trunk setting menu, user should
press [F] to set its forwarding table. Refer to the following figures:
Содержание SE0224
