![background image](http://html1.mh-extra.com/html/benq/se0224/se0224_user-manual_2734435033.webp)
2 *+,-3
2 *+,-3
2 *+,-3
2 *+,-3
Press [T] to enter trunking submenu and select chip 0. Choose enable
trunking to enter trunking group and members selection. Refer to the
following:
Each time when user enables certain chip's trunking function, further set-up
menu will show up; otherwise, the system keeps in stand-by status and waits
for user to select specific chip or to exit menu.
2. Select Trunk group 5 and choose port 11, 15 as trunking ports.
Press [T] to set trunk group and select port 11, then enable trunk group
to activate port 11 in Trunk group 5. Refer to the following figure:
Содержание SE0224
