BenQ MW724, Руководство пользователя

Страница: 24 / 80

Connection 24
Connecting Video source devices
You need only connect the projector to a Video source device using just one of the
above connecting methods, however each provides a different level of video quality.
The method you choose will most likely depend upon the availability of matching
terminals on both the projector and the Video source device as described below:
Connecting an HDMI source device
The projector provides an HDMI input jack that allows you to connect it to an HDMI
source device like a DVD player, a DTV tuner, a display or a notebook computer.
HDMI (High-Definition Multimedia Interface) supports uncompressed video data
transmission between compatible devices like DTV tuners, DVD players and displays
over a single cable. It provides pure digital viewing and listening experience.
Examine your Video source device to determine if it has a set of unused HDMI output
jacks available:
• If so, you can continue with this procedure.
• If not, you will need to reassess which method you can use to connect to
the device.
To connect the projector to an HDMI source device:
1. Take an HDMI cable and connect one end to the HDMI output jack of the HDMI
source device.
2. Connect the other end of the cable to the HDMI signal input jack on the
projector. Once connected, the audio can be controlled by the projector On-
Screen Display (OSD) menus. See
"Audio Settings" on page 61 for details.
• If the selected video image is not displayed after the projector is turned
on and the correct video source has been selected, check that the Video
Terminal name
Terminal
appearance
Reference Picture quality
HDMI
HDMII
"Connecting an
HDMI source
device" on page 24
Best
Component Video
COMPUTER IN-1/
COMPUTER IN-2
"Connecting a
Component Video
source device" on
page 25
Better
S-Video
S-VIDEO
"Connecting an S-
Video/composite
source device" on
page 26
Good
Video
VIDEO
Normal