Operation
45
over-heating. In cases like this, you should switch to High Altitude mode to solve
these symptoms. However, this is not to state that this projector can operate under
any and all harsh or extreme conditions.
Adjusting the sound
The sound adjusents made as below will have an effect on the projector speaker(s). Be
sure you have made a correct connection to the projector audio input. See
"Connection" on page 21
for how the audio input is connected.
Muting the sound
To adjust the sound level, press MUTE on the remote
control, or:
1.
Press Menu/Exit and then press
/
until the
SYSTEM SETUP: Advanced menu is selected.
2.
Press to select Audio Settings and press
Mode/Enter. The Audio Settings page displays.
3.
Select Mute and select On.
Adjusting the sound level
To adjust the sound level, press Volume on the
remote control or on the projector, or:
1.
Repeat steps 1-2 above.
2.
Select VOLUME and select a desired sound level.
Turning off the Power on/off ring tone
To turn off the ring tone:
1.
Repeat steps 1-2 in Muting the sound section.
2.
Select Power On/Off Ring Tone and select Off.
The only way to change Power on/off ring tone is setting On or Off here.
Setting the sound mute or changing the sound level will not affect the
Power on/off ring tone.
Adjusting the microphone’s sound level
To adjust the sound level:
1.
Repeat steps 1-2 in Muting the sound section.
2.
Select Microphone Volume and select a desired sound level.
Microphone sound will still function even though Mute is activated.
Содержание MW724
Страница 1: ...MX723 MW724 Digital Projector User Manual...
