Operation
70
PointDraw™
Pen 2.0
The PointDraw™ pen works like a wireless mouse - but one that works in midair, not on
your desktop. Just hold the pen in your hand, and point it at the projected image to point,
click and drag.
1.
Make sure the PointDraw™ pen’s battery is charged.
The charging time will take approximate 2.5 hours and will allow 30-35 hours of pen use.
•
Do not use the PointDraw™ pen while the pen’s battery is charging.
•
Do not disassemble the PointDraw™ pen yourself. Refer all servicing to qualified service
personnel.
•
The lithium battery is only rechargeable, and not user replaceable. Not user serviceable.
2.
Connect the projector and your computer with the supplied USB B type to A type
cable. If a pop-up window appears on the computer’s screen for requiring to provide
a driver, please use the original driver in your computer or the driver recommended
by your computer.
3.
Turn on the projector and make sure it's displaying the computer's screen - set the
source to VGA 1, VGA 2, or HDMI (press SOURCE button on the projector or
remote control if needed - you may need to press it several times).
4.
Point the pen at the screen to point, click, and drag - just like a normal mouse.
PUSH
PU
SH
or
USB mini-B type to A type cable
