Operation
49
2.
Highlight
Power on/off Ring Tone
and select Off.
The only way to change Power on/off ring tone is setting On or Off here. Setting the sound mute
or changing the sound level will not affect the Power on/off ring tone.
Adjusting the microphone’s sound level
To adjust the sound level, press
MIC/VOL
+/- on
the remote control, or
1.
Repeat steps 1-2 in Muting the sound section.
2.
Highlight
Microphone volume
e and select a
desired sound level.
Microphone sound will still function even though Mute
is activated.
Personalizing the projector menu display
The On-Screen Display (OSD) menus can be set according to your preferences. The
following settings do not affect the projection settings, operation, or performance.
•
Menu display time
in the
SYSTEM SETUP: Basic
>
Menu Settings
menu sets
the length of time the OSD will remain active after your last key press. The time length
ranges from 5 to 30 seconds in 5-second increments. Use
/
to select a suitable
time frame.
•
Menu position
in the
SYSTEM SETUP: Basic
>
Menu Settings
menu sets the
OSD position in five locations. Use
/
to select a preferred position.
•
Language
in the
SYSTEM SETUP: Basic
menu sets your familiar language for the
OSD menus. Use
/
to select your language.
•
Reminder Message
in the
SYSTEM SETUP: Basic
>
Menu Settings
menu sets
whether to display reminder messages on screen. Use
/
to select your desired
setting.
•
Splash Screen
in the
SYSTEM SETUP: Basic
menu sets a preferred logo screen
to be displayed during projector start-up. Use
/
to select a screen.
