Actuator & Tab Installation
continued
• Re-install the lower hinge mount to
the trim tab using the (2) supplied
1/4-20 x 3/4" screws and a #3
Phillips head screwdriver.
• Do not use a power screw driver.
Install the wiring connector
onto the wires:
»
Insert the white wire into
location pin #1, and the black
wire into location pin #2 into
the back of the connector until
the pin locks into place.
»
Ensure the proper wire color
is on the correct side of the
connector. The black actuator
wire should match the black
extension cable wire, and the
white actuator wire should
match the white wire
harness wire.
»
Install the orange plastic
wedge retainer into the front
of the connector.
»
For help with connectors
visit BennettTrimTabs.com/
ConnectorHelp.
White (#1)
Black(#2)
Bennett Marine
| Bolt Electric Trim Tab System
16
