BENETEAU First 18, Инструкция по сборке

Страница: 3 / 120

1. Use a shackle key or small screwdriver to release one side of the Retainer Clip. Use a finger to
hold the other side of the Retainer Clip in place.
2. Remove the free end of the Dyneema® Link from its recess in the he ad of the block.
3. Pass the link through the mounting point.
4. Press the end of the link over the Retainer Clip and firmly back into its recess in the block. A
little tension on the link may help to settle it into position.
5. Snap the Retainer Clip back into place over the link. An audible "click" confirms secure
attachment.
ATTACHMENT AT 0° (TWISTED DYNEEMA LINK)
1. Use a shackle key or small screwdriver to release one side of the Retainer Clip.
2. Remove the end of the Dyneema® Link from its recess in the head of t he block.
3. Twist the link anti- clockwise 360° (i.e. first twist 180° to form a figure -8 shape, then twist
again).
4. Pass the link through the mounting point, taking care to keep it twisted as described above.
5. Press the end of the twisted link over the Retainer Clip and firmly back into its recess in the
block. A little tension on the link may help to settle it into position.
6. Snap the Retainer Clip back into place over the link. An audible "click" confirms secure
attachment.
7. Rotate the block clockwise back to 0° and pull slightly to align and tension the link
symmetrically.
CARE AND MAINTENANCE of Ronstan Orbit Blocks™ with Dyneema® Links
Dyneema tie: The point onto which the Dyneema tie is secured must be smooth and rounded, free of
sharp angles and rough surfaces. The tie can wear out over time through exposure to UV and variable
weather conditions. Check ties regularly and replace them when they begin to show signs of wear.